![]() |
|
|
TIMBER : Boats |
PARQUET ° BOATS ° TUBS ° ANTIQUE ° ACCESSORIES ° BOWLS
| |
![]() Yandabo big wood canoe with stand (burmese style)
The canoes are traditionally made from solid teak and other hard woods. | |
![]() indi-canoe-02 Indi canadian canoe (great lake style) L 15 ft B 2.7 ft, with teak craddle Strip planked, glued and edge screwed. Epoxy glue coating on exterior, marine varnisch interior. All teak wood for planking, framing seats. Iron wood gunnels and trim. Cane seats. Planks edged screwed with stainless screws and glued with polyurethane foam glue. Brass fittings, bolts for seats and thwarts. Including oars, fittings and packing crate. Teak custom storage cradle available. |
![]() csilver-row-03 or csilver-sail-04 sailing version Captain Silver rowing / sailing (norwegian dinghy) L 9.4 ft B 4.3 ft D 2.3 ft, with teak craddle Lapstrake clinker construction, traditional methods using modern materials. All wood used is teak. Fastenings are bronze bolts, copper nails and roves and brass screws. All glues are waterproof epoxy glues. Sikaflex sealed laps. Natural finish cuprinol satin stain or marine varnish. Including oars, fittings and packing crate. Specialized cradle available. Sailing version includes : sail, mast, yard rudder, dagger board, bronze pulleys and rigging. |
![]() explor-motor-05 Explorer motor launch (classic scandinavian) LOA 20 ft, LWL 17 ft 4", B 6 ft 4", d 1 ft 6" Iron wood keel, backbone and sawn frames. Teak lapstrake clinker planking traditional construction. Iron wood (pyinkado) keel, frames, stem, stern post, keelson, gunnel strip, rudder. Teak planking, decling and interior. Copper nails and roves. Including hull, deck, interior and rudder. Not including engine, shaft and prop. Teak custom storage cradle available. Custom interior seating and custom cuddy cabin on demand. |
![]() merm-sail-06 or merm-motor-07 Mermaid sailing craft (british teak sailboat) LOA 16 ft 6", B 5 ft 9", d 14"/3 ft 10", mast 16 ft sail area 140 squarefeet, with teak craddle Sliding gunter cat rig - no jib. Lapstrake clinker construction, traditional methods. Teak laminated mast, boom and yard. Wood used is myanmar teak and ironwood pyinkado. Bronze and brass fastenings and screws. Copper rivets and roves, bronze and stainless bolts. All glues are waterproof epoxy glues. Sikaflex sealer between planks. Natural finish cuprinol satin stain or marine varnish. Center board and drop rudder are galvanized steel plate. Bronze oarlocks. All fittings and blocks are bronze, brass and stainless. Including oars, mast, yard, boom rudder, sail fittings, packing crate etc. Specialized cradle available. Motorized launch version : sail, mast, yard rudder, dagger board, bronze pulleys and rigging. Custom interior seating on demand. Inboard or outboard design possible. |
![]() mermaid sailing craft |
![]() in the sun |
|
did you look at the indoXotic sailboat ?
INFO ° CONTACT ° SHOP ° CONTAINER ° FREIGHT ° MEASURES |
|
|
http://www.indoxotic.com/en/holzboot.htm © 2002-2008 Style & Webservices by: http://www.typeset.com/ |